# E7 & X Series Charge Points **URL:** https://community.evnex.com/c/ex-series/8.md [Latest](https://community.evnex.com/latest.md) · [Categories](https://community.evnex.com/categories.md) --- ## [About the E7 & X Series Charge Points category](https://community.evnex.com/t/about-the-e7-x-series-charge-points-category/15)
**Author:** [@edharvey](https://community.evnex.com/u/edharvey)\ **Replies:** 0\ **Last updated:** [7 February 2021 00:34 UTC](https://community.evnex.com/t/about-the-e7-x-series-charge-points-category/15 "2021-02-07T00:34:38Z")
For questions and discussions about the E7 Series and X Series charge points. --- ## [Single phase solar with 3 phase X22](https://community.evnex.com/t/single-phase-solar-with-3-phase-x22/314)
**Author:** [@sparkles](https://community.evnex.com/u/sparkles)\ **Replies:** 6\ **Last updated:** [14 October 2026 00:41 UTC](https://community.evnex.com/t/single-phase-solar-with-3-phase-x22/314 "2026-10-14T00:41:54Z")
Hi - I am considering buying a 22kW X22 charger. I have a 3 phase grid connection and a 6 kW enphase solar system. The enphase system only seems to be feeding one of the three phases. Will the X22 be able to provide s… --- ## [X22 Short fall and not Performing](https://community.evnex.com/t/x22-short-fall-and-not-performing/741)
**Author:** [@SColburn79](https://community.evnex.com/u/SColburn79)\ **Replies:** 1\ **Last updated:** [5 July 2026 10:41 UTC](https://community.evnex.com/t/x22-short-fall-and-not-performing/741 "2026-07-05T10:41:09Z")
So I am quite disappointed in the X22 Charger. I run it on 3 phase for charge now. I watch it start out at 22kw 3ph and then after about 15mins I watch it slowly drop to a steady 15kw 3ph charge. This is currently at nig… --- ## [X22 Charge Speed Throttling](https://community.evnex.com/t/x22-charge-speed-throttling/592)
**Author:** [@auhouse86](https://community.evnex.com/u/auhouse86)\ **Replies:** 5\ **Last updated:** [2 July 2026 21:30 UTC](https://community.evnex.com/t/x22-charge-speed-throttling/592 "2026-07-02T21:30:39Z")
I’ve had the X22 charger for a few months now, and I’ve noticed the charging speed recently is being throttled rather aggressively. When I first got it installed around April this year, it would charge at 22kW until it … --- ## [X22 with BYD Sealion 7](https://community.evnex.com/t/x22-with-byd-sealion-7/681)
**Author:** [@uptime](https://community.evnex.com/u/uptime)\ **Replies:** 8\ **Last updated:** [27 May 2026 21:00 UTC](https://community.evnex.com/t/x22-with-byd-sealion-7/681 "2026-05-27T21:00:15Z")
Does anybody charge a BYD Sealion 7 with an X22? Could you share your charging experience? Specifically related to solar charging if you have solar but any feedback will be helpful. Thanks. --- ## [Is using three phase switching in a 3 phase house a bad idea?](https://community.evnex.com/t/is-using-three-phase-switching-in-a-3-phase-house-a-bad-idea/710)
**Author:** [@Randm](https://community.evnex.com/u/Randm)\ **Replies:** 2\ **Last updated:** [22 April 2026 22:26 UTC](https://community.evnex.com/t/is-using-three-phase-switching-in-a-3-phase-house-a-bad-idea/710 "2026-04-22T22:26:31Z")
It took a bit of effort but when we finally got our X22 installed with working solar diversion we faced the same issue as others; a 5kW solar system and very little chance of 3 phase solar charging. Three phase switchin… --- ## [X22 - Longer Charging Cable](https://community.evnex.com/t/x22-longer-charging-cable/703)
**Author:** [@tk1989](https://community.evnex.com/u/tk1989)\ **Replies:** 1\ **Last updated:** [18 April 2026 05:04 UTC](https://community.evnex.com/t/x22-longer-charging-cable/703 "2026-04-18T05:04:02Z")
Hi, looking to purchase a x22, is it possible to purchase with a longer cable like 8m? --- ## [X22-T2S - Keeping cable locked when not in use](https://community.evnex.com/t/x22-t2s-keeping-cable-locked-when-not-in-use/502)
**Author:** [@d3west](https://community.evnex.com/u/d3west)\ **Replies:** 2\ **Last updated:** [18 October 2025 01:21 UTC](https://community.evnex.com/t/x22-t2s-keeping-cable-locked-when-not-in-use/502 "2025-10-18T01:21:18Z")
Likely a feature request; but is there any way to keep a cable locked in the charge port when charging is complete? Two drivers for this - firstly is security, ensuring someone can’t just take the (rather exxy) charging… --- ## [X22 Start a charge outside of Schedule without App](https://community.evnex.com/t/x22-start-a-charge-outside-of-schedule-without-app/584)
**Author:** [@Pumba88](https://community.evnex.com/u/Pumba88)\ **Replies:** 2\ **Last updated:** [1 September 2025 06:05 UTC](https://community.evnex.com/t/x22-start-a-charge-outside-of-schedule-without-app/584 "2025-09-01T06:05:21Z")
Does the RFID fob act as an over ride to override any schedule and simply Charge Now on the X22? I liked the feature of the overrid button on the E2 and was hoping the X22 had something similar --- ## [3 phase api response](https://community.evnex.com/t/3-phase-api-response/579)
**Author:** [@DenimJackRabbit](https://community.evnex.com/u/DenimJackRabbit)\ **Replies:** 3\ **Last updated:** [1 September 2025 04:42 UTC](https://community.evnex.com/t/3-phase-api-response/579 "2025-09-01T04:42:46Z")
Hi, wanting to add the additional phases (monitoring) to the home assistant integration, just need to know what the api returns so I can add them. --- ## [Start a charge outside of Schedule without App](https://community.evnex.com/t/start-a-charge-outside-of-schedule-without-app/361)
**Author:** [@JonathanF](https://community.evnex.com/u/JonathanF)\ **Replies:** 3\ **Last updated:** [12 August 2025 02:51 UTC](https://community.evnex.com/t/start-a-charge-outside-of-schedule-without-app/361 "2025-08-12T02:51:40Z")
Is it possible, say for a visitor, to start an immediate charge of the E2 (outside of the scheduled start time) without having access to the app? --- ## [E2 purple led indicator](https://community.evnex.com/t/e2-purple-led-indicator/476)
**Author:** [@ChrisF](https://community.evnex.com/u/ChrisF)\ **Replies:** 3\ **Last updated:** [12 May 2025 21:51 UTC](https://community.evnex.com/t/e2-purple-led-indicator/476 "2025-05-12T21:51:22Z")
New user still trying to understand. Plugging tethered power cable into mg essence the indicator goes straight to the purple indicator light suggesting my vehicle is not requesting charge. It takes a couple of attempts … --- ## [Can an E2 plus be installed on a 3 phased system](https://community.evnex.com/t/can-an-e2-plus-be-installed-on-a-3-phased-system/464)
**Author:** [@Jing](https://community.evnex.com/u/Jing)\ **Replies:** 2\ **Last updated:** [5 May 2025 03:57 UTC](https://community.evnex.com/t/can-an-e2-plus-be-installed-on-a-3-phased-system/464 "2025-05-05T03:57:52Z")
HI, I’m interested in getting the E2 plus charger installed however was told that I need to get the X series instead due to my home being 3 phased. I’ve read what was available here in the forum and it sounds like the E2… --- ## [E2 charger fault](https://community.evnex.com/t/e2-charger-fault/457)
**Author:** [@Anawanahuanana](https://community.evnex.com/u/Anawanahuanana)\ **Replies:** 1\ **Last updated:** [13 April 2025 21:42 UTC](https://community.evnex.com/t/e2-charger-fault/457 "2025-04-13T21:42:42Z")
Hi there. My E2 charger has started throwing a red fault light shortly after charging begins. The app tells me that the “charger has lost connection to the server”. Is there anywhere I should be looking for more detaile… --- ## [Charging power drop due to temperature](https://community.evnex.com/t/charging-power-drop-due-to-temperature/408)
**Author:** [@adriant](https://community.evnex.com/u/adriant)\ **Replies:** 1\ **Last updated:** [17 January 2025 22:05 UTC](https://community.evnex.com/t/charging-power-drop-due-to-temperature/408 "2025-01-17T22:05:32Z")
Hi, just installed my Evnex E2 charger and started charging. It was consistently 7.2kwh until it dropped slightly to 6.5kwh showing that it’s due to temperature. I just want to check if this is due to temperature in the… --- ## [Switchboard requirements for 3 phase charger](https://community.evnex.com/t/switchboard-requirements-for-3-phase-charger/348)
**Author:** [@uptime](https://community.evnex.com/u/uptime)\ **Replies:** 1\ **Last updated:** [4 September 2024 09:05 UTC](https://community.evnex.com/t/switchboard-requirements-for-3-phase-charger/348 "2024-09-04T09:05:02Z")
Hi, I’m in the process of redesigning my switchboard as it’s an overflowing mess due to additions of heatpumps, submains, and a 3 phase solar system. Future planning will include an Evnex 3 phase charger install. How ma… --- ## [Firewall rules for evnex X series](https://community.evnex.com/t/firewall-rules-for-evnex-x-series/309)
**Author:** [@slith](https://community.evnex.com/u/slith)\ **Replies:** 2\ **Last updated:** [15 June 2024 03:54 UTC](https://community.evnex.com/t/firewall-rules-for-evnex-x-series/309 "2024-06-15T03:54:15Z")
I have an evnex X series charger. I have looked for information regarding what outbound protocols/ports the evnex chargers require. I’m surprised that I have not been able to find this information. Does anyone know exact… --- ## [Regulatory Compliance Mark](https://community.evnex.com/t/regulatory-compliance-mark/305)
**Author:** [@Chazza](https://community.evnex.com/u/Chazza)\ **Replies:** 1\ **Last updated:** [30 May 2024 05:01 UTC](https://community.evnex.com/t/regulatory-compliance-mark/305 "2024-05-30T05:01:06Z")
Just curious… The Australian Building Codes Board recommends that buildings install chargers with the RCM Tick ( https://www.abcb.gov.au/sites/default/files/resources/2023/ABCB%20EV%20Guidance%20Document%20June%202023.p… --- ## [Reading unit limit settings](https://community.evnex.com/t/reading-unit-limit-settings/196)
**Author:** [@sshipway](https://community.evnex.com/u/sshipway)\ **Replies:** 3\ **Last updated:** [15 May 2023 00:30 UTC](https://community.evnex.com/t/reading-unit-limit-settings/196 "2023-05-15T00:30:29Z")
Is there any way to read, and preferably also to set, the unit Charger Current Limit and Mains Supply Limit settings on an Evnex E2? I believe they may be misconfigured on my installation but I have no way to view them.… --- ## [Red light comes on at the end of charging](https://community.evnex.com/t/red-light-comes-on-at-the-end-of-charging/124)
**Author:** [@smbunn](https://community.evnex.com/u/smbunn)\ **Replies:** 3\ **Last updated:** [22 June 2022 02:48 UTC](https://community.evnex.com/t/red-light-comes-on-at-the-end-of-charging/124 "2022-06-22T02:48:47Z")
Each night, after my scheduled charging, I awake to find that the Evnex charger has a red light on instead of flashing green. I have to reset the charger every morning to get back to the default state. There are no err… --- ## [Remotely charging](https://community.evnex.com/t/remotely-charging/44)
**Author:** [@derek](https://community.evnex.com/u/derek)\ **Replies:** 15\ **Last updated:** [29 March 2022 03:55 UTC](https://community.evnex.com/t/remotely-charging/44 "2022-03-29T03:55:46Z")
Hi, is remote starting of a charge session supported? I am getting a “rejected” status when trying to initiate a charge as follows: 2021-07-02 17:31:47 INFO (MainThread) \[ocpp\] ENX-AU21060165: receive message \[3,"d205cd…